Clean Tile Grout Stains in 7 Easy Steps by 3 R Green

A dirty grout can make or break the look and appearance of tile surfaces. Because tile grouts are generally light-colored and porous, different types of dirt can easily make their way to the surface. From spills, splatters and all the way to dirt and grime, cleaning tile grout can be extra challenging. In this article, we’ll show you how to get rid of grout stains in 7 easy methods.

Cleaning Grout: 7 Easy Methods

  1. Scrub dirty grout away with plain water and a stiff brush - How to clean grout? Begin by getting a cleaning brush specifically created for removing grout stains and scrub every visible dirt or grime. To break away stains further, spray or apply warm water on the grout lines. Scrub the entire surface in a circular motion and rinse with more water until all stains start disappearing. Let the entire surface dry afterwards.

  1. Apply a solution of vinegar and warm water - If you’re dealing with tough grout stains, get vinegar and an empty spray bottle. Fill the bottle with ½ vinegar and ½ warm water. Spray the solution on the grout stains and let it sit for about five minutes. Scrub the stains off afterwards using a stiff brush.

  1. Apply baking soda paste and spray with vinegar - For pesky stains that are tough to beat, upgrade your cleaning grout power by throwing in baking soda to the mix. Simply apply a paste of baking soda and water to the grout lines and spray some more vinegar solution afterwards. You will see that the mixture on the surface will begin to foam. Once this reaction stops, scrub the surface using the stiff brush and rinse with clean water afterwards.

  1. Use a hydrogen peroxide solution - Using a hydrogen peroxide is also effective when dealing with moderate to heavy tile grout stains. If you’re going to use this chemical solution, you can apply it directly to the affected area or mix it along with the baking soda paste.

  1. Apply oxygen bleach to the affected area - Use oxygen bleach cleaners for more complicated stains on your tile for grout cleaning. A lot of these cleansers are available in liquid or powdered form and are sold in leading supermarkets or grocery stores nationwide. Whatever cleaner type you choose, it’s always important to make sure the area is well-ventilated to prevent any chemical suffocation. The bleach solution must work for about 10 to 15 minutes on the surface before it can be rinsed. Use clean water to rinse away the solution along with dirt stains. Once you have a clean grout, let everything dry thoroughly.

  1. Use chlorine bleach - Chlorine bleach and other commercial cleaners containing the ingredient can also be used in small quantities to remove grout stains. Simply rinse away any previous cleaning solutions you may have previously tried — such as vinegar, baking soda and bleach — before applying the bleach directly onto the surface. Once you can see that you have a clean grout surface, let it dry completely.

  1. Steam clean the stains as an alternative - How to clean grout the alternative way? If you don’t have any of the all-natural or chemical cleaning ingredients, you can make use of a steam floor cleaner to get rid of tile grout stains. Simply go through each corner and surface of the tile grout repeatedly until stains are broken down. Afterwards, wipe or rinse away the entire thing using a cloth and warm water.

Keeping Your Tile Grout Clean

Cleaning and maintaining your tile grout is a complicated but necessary process to keep them shiny and dirt-free. However, if you’re looking for an easier and faster way of cleaning them contact us at 3 R Green! (404) 946-8886

2 views0 comments